TESTING INDIVIDUAL
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.

# pre_auth-client-config # passwd:         compat
passwd: files ldap
# pre_auth-client-config # group:          compat
group: files ldap
# pre_auth-client-config # shadow:         compat
shadow: files ldap

hosts:          files dns mdns
networks:       files

protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

# pre_auth-client-config # netgroup:       nis
netgroup: nis
#
# /etc/pam.d/common-account - authorization settings common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of the authorization modules that define
# the central access policy for use on the system.  The default is to
# only deny service to users whose accounts are expired in /etc/shadow.
#
# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.
#

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # account	[success=1 default=ignore]	pam_unix.so 
# pre_auth-client-config # # here's the fallback if no module succeeds
# pre_auth-client-config # account	requisite			pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # account	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # # end of pam-auth-update config
account    sufficient   pam_unix.so
account    sufficient   pam_ldap.so
account    required     pam_deny.so
#
# /etc/pam.d/common-auth - authentication settings common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of the authentication modules that define
# the central authentication scheme for use on the system
# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
# traditional Unix authentication mechanisms.
#
# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # auth	[success=1 default=ignore]	pam_unix.so nullok_secure
# pre_auth-client-config # # here's the fallback if no module succeeds
# pre_auth-client-config # auth	requisite			pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # auth	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # # end of pam-auth-update config
auth       required     pam_env.so
auth       sufficient   pam_unix.so likeauth nullok
auth       sufficient   pam_ldap.so use_first_pass
auth       required     pam_deny.so
#
# /etc/pam.d/common-password - password-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define the services to be
# used to change user passwords.  The default is pam_unix.

# Explanation of pam_unix options:
#
# The "sha512" option enables salted SHA512 passwords.  Without this option,
# the default is Unix crypt.  Prior releases used the option "md5".
#
# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
# login.defs.
#
# See the pam_unix manpage for other options.

# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # password	[success=1 default=ignore]	pam_unix.so obscure sha512
# pre_auth-client-config # # here's the fallback if no module succeeds
# this is obviously a completely redundant line, except that it lets us
# handle better the case where there are no "Primary" modules provided
# pre_auth-client-config # password	required			pam_permit.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # password	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # # end of pam-auth-update config
password   required     pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
password   sufficient   pam_unix.so nullok md5 shadow use_authtok
password   sufficient   pam_ldap.so use_first_pass
password   required     pam_deny.so
#
# /etc/pam.d/common-session - session-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define tasks to be performed
# at the start and end of sessions of *any* kind (both interactive and
# non-interactive).
#
# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # # here's the fallback if no module succeeds
# this is obviously a completely redundant line, except that it lets us
# handle better the case where there are no "Primary" modules provided
# pre_auth-client-config # session	required			pam_permit.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # session	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # session	required	pam_unix.so 
# pre_auth-client-config # # end of pam-auth-update config
session    required     pam_limits.so
session    required     pam_unix.so
session    optional     pam_ldap.so
TESTING ALL
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.

# pre_auth-client-config # passwd:         compat
passwd: files ldap
# pre_auth-client-config # group:          compat
group: files ldap
# pre_auth-client-config # shadow:         compat
shadow: files ldap

hosts:          files dns mdns
networks:       files

protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

# pre_auth-client-config # netgroup:       nis
netgroup: nis
#
# /etc/pam.d/common-account - authorization settings common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of the authorization modules that define
# the central access policy for use on the system.  The default is to
# only deny service to users whose accounts are expired in /etc/shadow.
#
# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.
#

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # account	[success=1 default=ignore]	pam_unix.so 
# pre_auth-client-config # # here's the fallback if no module succeeds
# pre_auth-client-config # account	requisite			pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # account	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # # end of pam-auth-update config
account    sufficient   pam_unix.so
account    sufficient   pam_ldap.so
account    required     pam_deny.so
#
# /etc/pam.d/common-auth - authentication settings common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of the authentication modules that define
# the central authentication scheme for use on the system
# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
# traditional Unix authentication mechanisms.
#
# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # auth	[success=1 default=ignore]	pam_unix.so nullok_secure
# pre_auth-client-config # # here's the fallback if no module succeeds
# pre_auth-client-config # auth	requisite			pam_deny.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # auth	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # # end of pam-auth-update config
auth       required     pam_env.so
auth       sufficient   pam_unix.so likeauth nullok
auth       sufficient   pam_ldap.so use_first_pass
auth       required     pam_deny.so
#
# /etc/pam.d/common-password - password-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define the services to be
# used to change user passwords.  The default is pam_unix.

# Explanation of pam_unix options:
#
# The "sha512" option enables salted SHA512 passwords.  Without this option,
# the default is Unix crypt.  Prior releases used the option "md5".
#
# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
# login.defs.
#
# See the pam_unix manpage for other options.

# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # password	[success=1 default=ignore]	pam_unix.so obscure sha512
# pre_auth-client-config # # here's the fallback if no module succeeds
# this is obviously a completely redundant line, except that it lets us
# handle better the case where there are no "Primary" modules provided
# pre_auth-client-config # password	required			pam_permit.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # password	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # # end of pam-auth-update config
password   required     pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
password   sufficient   pam_unix.so nullok md5 shadow use_authtok
password   sufficient   pam_ldap.so use_first_pass
password   required     pam_deny.so
#
# /etc/pam.d/common-session - session-related modules common to all services
#
# This file is included from other service-specific PAM config files,
# and should contain a list of modules that define tasks to be performed
# at the start and end of sessions of *any* kind (both interactive and
# non-interactive).
#
# As of pam 1.0.1-5, this file is managed by pam-auth-update by default.
# To take advantage of this, it is recommended that you configure any
# local modules either before or after the default block, and use
# pam-auth-update to manage selection of other modules.  See
# pam-auth-update(8) for details.

# pre_auth-client-config # # here are the per-package modules (the "Primary" block)
# pre_auth-client-config # # here's the fallback if no module succeeds
# this is obviously a completely redundant line, except that it lets us
# handle better the case where there are no "Primary" modules provided
# pre_auth-client-config # session	required			pam_permit.so
# prime the stack with a positive return value if there isn't one already;
# this avoids us returning an error just because nothing sets a success code
# since the modules above will each just jump around
# pre_auth-client-config # session	required			pam_permit.so
# pre_auth-client-config # # and here are more per-package modules (the "Additional" block)
# pre_auth-client-config # session	required	pam_unix.so 
# pre_auth-client-config # # end of pam-auth-update config
session    required     pam_limits.so
session    required     pam_unix.so
session    optional     pam_ldap.so
