[root@pc-db1]# /opt/MegaRAID/MegaCli/MegaCli64  -AdpAllInfo -aALL
                                     
Adapter #0

==============================================================================
                    Versions
                ================
Product Name    : PERC 6/i Integrated
Serial No       : 1122334455667788
FW Package Build: 6.0.1-0080

                    Mfg. Data
                ================
Mfg. Date       : 06/08/07
Rework Date     : 06/08/07
Revision No     : 
Battery FRU     : N/A

                Image Versions In Flash:
                ================
FW Version         : 1.11.52-0349
BIOS Version       : NT13-2
WebBIOS Version    : 1.1-32-e_11-Rel
Ctrl-R Version     : 1.01-010B
Boot Block Version : 1.00.00.01-0008

                Pending Images In Flash
                ================
None

                PCI Info
                ================
Vendor Id       : 1000
Device Id       : 0060
SubVendorId     : 1028
SubDeviceId     : 1f0c

Host Interface  : PCIE

Number of Frontend Port: 0 
Device Interface  : PCIE

Number of Backend Port: 8 
Port  :  Address
0        5000c500079f8cf9 
1        5000c500079f5c35 
2        5000c500079fc0c9 
3        5000c500079dc339 
4        0000000000000000 
5        0000000000000000 
6        0000000000000000 
7        0000000000000000 

                HW Configuration
                ================
SAS Address     : 5001e4f021048f00
BBU             : Present
Alarm           : Absent
NVRAM           : Present
Serial Debugger : Present
Memory          : Present
Flash           : Present
Memory Size     : 256MB

                Settings
                ================
Current Time                     : 20:31:29 5/13, 2010
Predictive Fail Poll Interval    : 300sec
Interrupt Throttle Active Count  : 16
Interrupt Throttle Completion    : 50us
Rebuild Rate                     : 30%
PR Rate                          : 30%
Resynch Rate                     : 30%
Check Consistency Rate           : 30%
Reconstruction Rate              : 30%
Cache Flush Interval             : 4s
Max Drives to Spinup at One Time : 2
Delay Among Spinup Groups        : 12s
Physical Drive Coercion Mode     : 128MB
Cluster Mode                     : Disabled
Alarm                            : Disabled
Auto Rebuild                     : Enabled
Battery Warning                  : Enabled
Ecc Bucket Size                  : 15
Ecc Bucket Leak Rate             : 1440 Minutes
Restore HotSpare on Insertion    : Disabled
Expose Enclosure Devices         : Disabled
Maintain PD Fail History         : Disabled
Host Request Reordering          : Enabled
Auto Detect BackPlane Enabled    : SGPIO/i2c SEP
Load Balance Mode                : Auto
Any Offline VD Cache Preserved   : No

                Capabilities
                ================
RAID Level Supported             : RAID0, RAID1, RAID5, RAID6, RAID10, RAID50, RAID60
Supported Drives                 : SAS, SATA

Allowed Mixing:

Mix In Enclosure Allowed

                Status
                ================
ECC Bucket Count                 : 0

                Limitations
                ================
Max Arms Per VD         : 32 
Max Spans Per VD        : 8 
Max Arrays              : 128 
Max Number of VDs       : 64 
Max Parallel Commands   : 1008 
Max SGE Count           : 80 
Max Data Transfer Size  : 8192 sectors 
Max Strips PerIO        : 42 
Min Stripe Size         : 8kB
Max Stripe Size         : 1024kB

                Device Present
                ================
Virtual Drives    : 2 
  Degraded        : 0 
  Offline         : 0 
Physical Devices  : 5 
  Disks           : 4 
  Critical Disks  : 0 
  Failed Disks    : 0 

                Supported Adapter Operations
                ================
Rebuild Rate                    : Yes
CC Rate                         : Yes
BGI Rate                        : Yes
Reconstruct Rate                : Yes
Patrol Read Rate                : Yes
Alarm Control                   : Yes
Cluster Support                 : No
BBU                             : Yes
Spanning                        : Yes
Dedicated Hot Spare             : Yes
Revertible Hot Spares           : No
Foreign Config Import           : Yes
Self Diagnostic                 : Yes
Allow Mixed Redundancy on Array : No
Global Hot Spares               : Yes
Deny SCSI Passthrough           : No
Deny SMP Passthrough            : No
Deny STP Passthrough            : No

                Supported VD Operations
                ================
Read Policy          : Yes
Write Policy         : Yes
IO Policy            : Yes
Access Policy        : Yes
Disk Cache Policy    : Yes
Reconstruction       : Yes
Deny Locate          : No
Deny CC              : No

                Supported PD Operations
                ================
Force Online                            : Yes
Force Offline                           : Yes
Force Rebuild                           : Yes
Deny Force Failed                       : No
Deny Force Good/Bad                     : No
Deny Missing Replace                    : No
Deny Clear                              : No
Deny Locate                             : No
Disable Copyback                        : No
Enable Copyback on SMART                : No
Enable Copyback to SSD on SMART error   : No

                Error Counters
                ================
Memory Correctable Errors   : 0 
Memory Uncorrectable Errors : 0 

                Cluster Information
                ================
Cluster Permitted     : No
Cluster Active        : No

                Default Settings
                ================
Phy Polarity                     : 0 
Phy PolaritySplit                : 0 
Background Rate                  : 30 
Stripe Size                      : 64kB
Flush Time                       : 4 seconds
Write Policy                     : WB
Read Policy                      : None
Cache When BBU Bad               : Disabled
Cached IO                        : No
SMART Mode                       : Mode 6
Alarm Disable                    : No
Coercion Mode                    : 128MB
ZCR Config                       : Unknown
Dirty LED Shows Drive Activity   : No
BIOS Continue on Error           : No
Spin Down Mode                   : None
Allowed Device Type              : SAS/SATA Mix
Allow Mix In Enclosure           : Yes
Allow HDD SAS/SATA Mix In VD     : No
Allow SSD SAS/SATA Mix In VD     : No
Allow HDD/SAS Mix In VD          : No
Allow SATA In Cluster            : No
Max Chained Enclosures           : 1 
Disable Ctrl-R                   : No
Enable Web BIOS                  : No
Direct PD Mapping                : Yes
BIOS Enumerate VDs               : Yes
Restore Hot Spare on Insertion   : No
Expose Enclosure Devices         : No
Maintain PD Fail History         : No
Disable Puncturing               : No
Zero Based Enclosure Enumeration : Yes
PreBoot CLI Enabled              : No
LED Show Drive Activity          : No
Cluster Disable                  : Yes
SAS Disable                      : No
Auto Detect BackPlane Enable     : SGPIO/i2c SEP
Delay during POST                : 0 

Exit Code: 0x00
